Thermal Analyzers Products

Thermal Analyzers Products

by

john smith13

Rtinstruments is a leading manufacturer and supplier of high-performance Thermal Analyzers, calorimeters, Rheometers Visco, Spectrophotometers, Microcalorimeters for different applications such as Pharmaceuticals & Life Science, Materials, Energy, Process Safety, etc.

Thermal Analyzers product line is divided into many instrument families: EXSTAR TMA/SS7100, EXSTAR TG/DTA7000 Series, EXSTAR DSC7020, EXSTAR DSC6000 Series, EXSTAR TG/DTA6000 Series, EXSTAR TMA/SS6000 Series, EXSTAR DMS6100 etc. The details of thermal analyzers products are given below :

EXSTAR6000 DSC :

The DSC offers a representative measurement technique of thermal analysis to perform fusion, glass transition, thermal history, crystallization, Curie point, oxidation stability and thermal change. It has following features :

– Simple measurement unit exchange can be performed by the user giving freedom to the user to perform a host of measurement applications by utilizing a variety of measurement units (super high sensitivity, high sensitivity, and high temperature models).

– In order to cover a particular measurement, users can now select and exchange cooling units such as liquid nitrogen, electrically cooled, and air cooled units.

EXSTAR6000 TG/DTA :

The TG/DTA is a simultaneous measurement instrument combining TG, which utilizes a horizontal differential type balance beam, with the highly flexible DTA feature. It has following features :

– Through the utilization of an automatic cooling unit, the instrument is now automatically cooled to a set temperature after measurements, which raises the effectiveness of measurements.

– As with the DSC, the auto sampler is easily attached to the TG/DTA.

EXSTAR6000 TMA/SS :

This is a multi-purpose thermo-physical measurement device that measures expansion coefficient, glass transition, softening, swelling, creep. It has following features :

– By simply setting the sample in the sample tube, the length of the sample is automatically measured eliminating the need for micrometer operations.

– Standard equipped with the automatic protect function, which automatically stops the measurement to prevent adhesion of a sample on the probe in the case deformation value exceeds the set value.

EXSTAR6000 DMS :

This instrument applies various deformations, such as bending, tension, compression and shear, to a solid sample, and then the tand, and elasticity of the sample is calculated using the deformation amount and the response delay. It has following features :

– Measurements from -150 C are fully automatic using the auto gas cooling unit.

This article is written by John Smith he is freelance content write also write for

Hotels in Manali

and

Diesel Generator

,

Diesel Generators

etc.

Article Source:

ArticleRich.com